| Author | Post |
|---|
noggin
Member
|
Posted: Mon Aug 24th, 2009 20:04 |
|
14/3 /10
I am breaking a Steib S501 that i was going to restore .Plus i have a number of other steib parts .Below are some of the parts, all the used items are in various conditions ,i also have a few new items for more info on any of the items please make contact as below in the first instance.
Please also note that many of the parts fit other models of Steibs eg LS200 ,S250 ,S350,S500 just ask if your unsure i will be happy to help. All PARTS LISTED ARE USED UNLESS it states new.
. If you want photo's of any of the parts i am happy to supply.
1 Alloy wheel nut spinner Left hand thread. £28
1 Steel wheel nut spinner Left hand thread. THIN TYPE £28
2 Hood frames wants recovering , but with remains of the hood which would be usefull as a pattern S350/S500/S501. £45 each
1 Hood frame coverall, useable but will want some stitching repair .£30
ssssssssssssss
Brake plate/shoes ect prices and types to follow.
1 Complete Four stud type brake plate (160 mm type) complete fitted with brand new wheel cylinder and brake springs. £195
1 Complete Single bolt type brake plate (160mm type) complete . Available shortly.
ssssssssssssssssss
New sealed wheel bearings all models £10 Pr
New sealed swinging arm bearings for S350/S500 (not S501) £10 Pr
1 New chrome and stainless replacement boot lid locking handle with 2 keys and the
correct 3 screw fitting base.£50
1 Original boot lid locking handle with 1 key, will want recroming £40
1 Original boot handle, NO KEYS , with original rubber base and strenghtner plate will want rechromeing . £40
1 pr of New black card trim for iinterior sides . £20 Pr
1 pr of New body repair panels--- front and rear seat spring mounts £35 Pr
1 New body repair panel--- the tunnel that sits behind the seat. £25
1 New body repair panel S500/501 for boot base £40
1pr of New body repair panels S500/501 for boot bottom sides and portion that runs along the side of the seat sides ( all below the bottom recess for the alloy trim) £100 pr
xxxxxxxxxxxxx
S501 body and boot lid only,no alloy trim or badge. Bare and in rough condition BUT complete with some new repair panels--- Seat spring mounts front and rear plus a full length bottom panel and tunnel .£250
xxxxxxxxxxxxx
S501 chassis, Bare , ideal for uprateing your S500 £200 OR may cut up to supply individual parts of the chassis.
eg ----
The bend with alloy covering that go's over the top of the sidecar body
complete with 2 steel tube slugs to aid refitting. Good alloy. £90
The horizontal bend with alloy covering that go's in front of the body complete with 2 steel tube slugs to aid refitting. Good alloy. £90
Mudguard mount front ( note NOT the alloy mounting)£35
Complete Indispension suspension/ wheel spindle ( 18mmx1.5mm pitch left hand thread) and rear frame section( not including the rear mudguard mounting) plus 2 steel tube slugs to aid refitting. £110.
xxxxxxxxxxxx
1 New Fibreglass mudguard ( not the best of quality) undrilled £45.
1 As NEW CNC machined Stainless steel Conical mudguard bolt . £50
2 New machined Conical mudguard bolts in alloy with stainless insert. £25.each
S500/501 boot lid with brass hinge pin .Available shortly.
S500/501 boot lid alloy trim £10 pr
Other items new and used will be listed as i find them as some items are stored elsewere.
All items plus postage will post overseas or can be collected.
Location Dumfries area
Contact Post or private message or longbed(at)hotmail.co.uk
Last edited on Mon Mar 15th, 2010 19:53 by noggin
|
colin.m.haig@uk.pwc.com
Guest
|
Posted: Tue Aug 25th, 2009 14:39 |
|
so I see you have got a braked hub , sorry , just noticed this
I would give it a good home if you give me a bell , Colin , 07843 369559
regards
|
flow
Guest
|
Posted: Thu Oct 8th, 2009 09:16 |
|
Hello,
I´m looking for parts to complete my Steib S501. Especially the supension units for the sidecar and other parts.
So can you contact my and send me a list of what you´ve got left.
florian.lucas@gmx.net
Would be very kind.
Thanks a lot,
Florian
|
noggin
Member
|
Posted: Thu Oct 8th, 2009 22:33 |
|
| Hi Email sent with my contact details.
|
merrick marshall
Guest
|
Posted: Sun Feb 7th, 2010 09:34 |
|
| hi , what have you left of the steib parts. Sorry should have been a bit quicker. rgds merrick
|
marshmallow
Guest
|
Posted: Sun Feb 7th, 2010 09:58 |
|
| merricmarshall748@hotmail.com
|
marshmallow
Guest
|
Posted: Sun Feb 7th, 2010 10:00 |
|
| will get it right in the end merrickmarshall748@hotmail.com
|
Ted
Member
| Joined: | Wed Dec 6th, 2006 |
| Location: | |
| Posts: | 57 |
|
Posted: Mon Feb 8th, 2010 19:27 |
|
Hi Noggin.
Please can you contact me. via this email address. merrickmarshall748@hotmail.com
or give me a call on 07788444744 I want to buy some bits and having trouble contacting you.
Regards
This message reply sent on behalf of FoSC member by Ted Membership Secretary
|
noggin
Member
|
Posted: Wed Feb 10th, 2010 18:52 |
|
merrick marshall wrote: hi , what have you left of the steib parts. Sorry should have been a bit quicker. rgds merrick
Everything thats listed is for sale. my email is at the end of the advert.
|
les
Guest
|
Posted: Sun Feb 14th, 2010 10:34 |
|
hello noggin jasper here just wondering if the steib hood frame and cover will go onto a dudgeon and wild chair.
|
noggin
Member
|
Posted: Mon Feb 15th, 2010 20:39 |
|
les wrote: hello noggin jasper here just wondering if the steib hood frame and cover will go onto a dudgeon and wild chair.
Hi Les . I don't see why not . But just in case i can supply a fitting kit comprising a hammer some 6" nails and a roll of duct tape LOL
|
noggin
Member
|
Posted: Mon Mar 1st, 2010 10:44 |
|
noggin wrote: les wrote: hello noggin jasper here just wondering if the steib hood frame and cover will go onto a dudgeon and wild chair.
Hi Les . I don't see why not . But just in case i can supply a fitting kit comprising a hammer some 6" nails and a roll of duct tape LOL
Only Jokeing Les , But unless you have a original steib screen or one thats the same shape eg in height or width it's not going to fit very well .Although saying that i don't see any reason why the hood framework could not be altered and as the covering for the hood will have to be remade as the one on the framework is only good for a pattern due to it's age and rips ect. If i was down your way i could have brought it down to try it out but at the moment i have no plans for coming past. Although i may be in Preston in the next week or so for Mothers day When ever that is !!.Let me know as soon as poss if thats any help .
|
Mike
Guest
|
Posted: Sun Mar 21st, 2010 10:38 |
|
Hi Noggin
Do you still have the Steib hood frame's and coverall for sale ?
Mike Barker
|
noggin
Member
|
Posted: Tue Mar 30th, 2010 18:55 |
|
Mike wrote: Hi Noggin
Do you still have the Steib hood frame's and coverall for sale ?
Mike Barker
Hi Mike
Sorry for the delay but i've been having computer problems.Yes still have what your after.Send me a email ( it's at the bottom of my advert). noggin
|
Current time is 17:57 | |
|
